From that number you supplied, it appears you have axles that are 5,200-lb to 6,000-lb with a 12" - 6 on 5-1/2 bolt pattern. For brake assemblies I recommend # AKEBRK-7R-SA for the right hand side and # AKEBRK-7L-SA for the left. This is a self-adjusting 12' brake assembly, mounting bolts and hardware, # BRKH12S sold separately.
If you do decide you need to replace the hub and drum assembly, I recommend, # AKHD-655-6-K. This is an etrailer replacement hub and drum assembly supplied... view full answer...
According to my research you should have 3,500 lb axles on your 2013 Dutchmen Model 261BHS which means you need the following:
- Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles # AKHD-655-35-EZ-K (Need Qty 4)
- Electric Trailer Brake Kit - Self-Adjusting # AKEBRK-35-SA (Need Qty 2 since these are a set)
If you have a different setup please let me know so I can make a different recommendation for you! view full answer...
We do not have a list of parts used on your Dutchmen Aerolite trailer so to determine the correct replacement parts for your trailer it will require some measuring and examination of existing parts.
The fan motor is likely going to be # BVD0218-00 because this motor is now used as the replacement for most old and new Ventline roof vents. But you can check the motor on your vents now for model information and specs and that will help.
The cover or lid itself could be one of several designs.... view full answer...
If you are referring to the Lippert Electric Trailer Jack with Footplate part # LC285318 then you are going to want to use the Replacement Extend / Retract Switch Assembly part # LC226023. In order to replace the switch you will need to obtain a pick tool or very small flathead screwdriver and beging to pry the top or bottom of the switch out of the housing. Once this is done you can then remove the spade terminals and install them on the new switch. In order to install the new switch you... view full answer...
I was able to find a picture of the part number 90110 C1 that you need and found that the exact replacement is the # BV0554-03 that you referenced. If you wanted white instead you'd want # BV0554-01. view full answer...
Since your trailer has 12" brakes with a 6-bolt mounting pattern you'll actually need brakes for a 5.2K axle:
- Electric Trailer Brake Kit - Self-Adjusting # AKEBRK-7-SA
The for a tire and wheel combo I highly recommend the following:
- Westlake ST225/75R15 Radial Tire w 15" Liger Aluminum Wheel # LH36FR
This tire and wheel set not only looks sleek but it performs very well and is backed by complimentary roadside assistance for 2 years as well as a 5-Year warranty on the tire and... view full answer...
Go To Results